Laboratory Equipment

Product Details:

The majority of the small capacity centrifuging requirements of medical practitioners, pathological laboratories and hospitals for routine centrifuging tests. The units are fitted with resiliently mounted motor for vibration free performance having built in 5 step speed regulator. Available with Swing out or Angle rotor.

Product Details:

Hanna HI98107 pH meter for water is a reliable tester and rugged for use in the lab or field. Hanna pH meter is only 0.7″ inch and extremely ergonomic, fitting comfortably in your hand. This tester keeps things simple with a two-button operation; one for Calibration, the other for ON/OFF.

Product Details:

The majority of the small capacity centrifuging requirements of medical practitioners, pathological laboratories and hospitals for routine centrifuging tests. The units are fitted with resiliently mounted motor for vibration free performance having built in 5 step speed regulator. Available with Swing out or Angle rotor.

Product Details:

Alcoscan AL6000 is a hand held, portable breath alcohol tester to check subject'sbreath alcohol concentration with reliable accuracy and it is available to test in Passivemode.

Product Details:

We are Engaged in Offering Wide range of Quality products to our clients, Our Products are really appreictaed by our clients

Product Details:

We are Engaged in Offering Wide range of Quality products to our clients, Our Products are really appreictaed by our clients

Product Details:

A pen-type conductivity meter, also known as a pocket conductivity meter or handheld conductivity meter, is a portable device used to measure the electrical conductivity of a solution. Electrical conductivity is a measure of a solution's ability to conduct an electrical current, and it is often used as an indicator of the concentration of ions in a solution. Conductivity meters are commonly used in various fields, including water quality testing, environmental monitoring, agriculture, and laboratory research.

Here are some key features and components typically found in a pen-type conductivity meter:

Probe or Sensor: The meter typically has a built-in probe or sensor that is immersed in the solution being tested. This probe contains electrodes that come into contact with the solution, allowing the measurement of electrical conductivity.

Display: Pen-type conductivity meters have a small digital display that shows the measured conductivity value. Some models may also display temperature, as conductivity can be temperature-dependent.

Calibration: Most conductivity meters require periodic calibration to ensure accuracy. They are often calibrated using standard solutions with known conductivity values.

Temperature Compensation: Some conductivity meters include automatic temperature compensation (ATC) to correct for variations in conductivity that can occur with temperature changes. Temperature can significantly affect conductivity readings, so this feature helps provide accurate results.

Waterproof Design: Many pen-type conductivity meters are designed to be waterproof or water-resistant to withstand exposure to liquids.

Battery or Power Source: They are typically powered by batteries, which may be replaceable or rechargeable.

Buttons or Controls: The meter may have buttons or controls for functions such as turning the device on/off, calibrating, and adjusting settings.

To use a pen-type conductivity meter, you would typically follow these steps:

Turn on the meter and allow it to warm up, if necessary.

Immerse the probe into the solution you want to test.

Wait for the reading to stabilize. The display will show the conductivity value in units such as microsiemens per centimeter (μS/cm) or millisiemens per centimeter (mS/cm).

If temperature compensation is needed, make sure the meter is accurately measuring the solution's temperature.

Record the conductivity reading.

Rinse and clean the probe thoroughly between measurements to prevent contamination.

If necessary, calibrate the meter using standard calibration solutions.

Pen-type conductivity meters are valuable tools for quick and convenient conductivity measurements in the field or laboratory. They are commonly used for assessing water quality in bodies of water, monitoring the salinity of soil or hydroponic solutions, and various other applications where assessing ion concentration is important.

Top of Form

 

Product Details:

An ecoProduct Description
An economical child CPR manikin featuring single-use airway/lung/face shield system; Anatomical landmarks including sternum and rib cage plus substernal notch. No cleaning, no disinfecting, no disassembly required.nomical child CPR manikin featuring single-use airway/lung/face shield system; Anatomical landmarks including sternum and rib cage plus substernal notch. No cleaning, no disinfecting, no disassembly required.

Product Details:

Electronic CPR Manikin with Light and Sound Indicator is the most featured yet affordable CPR Manikin available in India. Powered by 2 AA Batteries,it is light weight and easy to carry for demonstration and teaching at different places. 

Product Details:

About this itemStop Watch 1/100 secondTime: Hour / Minute / SecondCalendar: Day / Date / Month

Product Details:

We are Engaged in Offering Wide range of Quality products to our clients, Our Products are really appreictaed by our clients

Product Details:

Heating mantles are used in laboratories to heat or temper organic liquids. They can be used with round-bottomed flasks, reaction kettles, or any device used for evaporation, boiling, extraction, or distillation.

Product Details:

We are Engaged in Offering Wide range of Quality products to our clients, Our Products are really appreictaed by our clients
Hygrometer, Dry & Wet Bul
• Plastic Body
• With Humidity Chart .

Product Details:

Model No:LAB214e
General Specifications • Weighing units: g, mg, ct, GN, lb, oz, dwt, mm, ozt, tl.H, tl.S, tl.T, T, custom unit • Interface: RS-232, USB • Power supply: 18VDC 830mA adaptor • Display: Backlit LCD with 24mm-high digits • Calibration: External, Internal automatic • Housing: ABS Plastic • Operating temperature: 10° to 30°C